Monthly Archives: September 2010

  • Painted Vent Visors are Super Stylish

    Vent visors are a useful addition to any vehicle, and can especially fruitful in areas with hot and warm weather. By shielding the tops of your windows, the visors let you keep your windows cracked in the parking lot without potential thieves seeing the openings. This can greatly improve the comfort in your vehicle, especially in the first few minutes of travel when you are waiting for the AC to kick in. You can also keep windows open in rainy weather, since the visors will block out the rain. Again, this air circulation will keep your vehicle interior cooler and much more comfortable for passengers. Circulating air also can help reduce window fog that can accumulate and block your vision. If you like off-roading, visors can come in handy there too, as they provide extra protection from mud, sand, and dust. If you like the idea of vent visors, but don't like their generic coloring, keep in mind that Painted Vent Visors are available too.

    AVS manufactures an In Channel Ventvisor that is constructed of long-lasting reinforced acrylic. It is available in a dark smoke color or can be painted to match the factory color of your vehicle. It is very easy to install, with no drilling required; each ventvisor installs inside the window channel using automotive-grade tape. This visor is designed with no leg to obstruct your side view mirrors, so you do not have to worry about visibility problems. These ventvisors are available in 2 piece and 4 piece sets and are covered by a limited lifetime warranty.

    Auto Ventshade Visors like the Aerovisor are a larger type of vent visor that are more prominent and rugged. Like the inchannel visors, they come in a dark smoke color that can be painted to match your vehicle's factory color. They also install with automotive-grade tape, with no drilling required. However, they install on the exterior of your car or truck, along the window frame. They are available in 2 piece sets for your vehicle's front doors and have a limited lifetime warranty.

    Auto

  • Change to Chrome and Love Your New Look

    If you're sick of seeing the same old vehicle in your driveway, but don't have enough to buy a brand new car (and who does?), then maybe it's time to upgrade your current vehicle. New Chrome Accessories can be the perfect upgrade because they look good individually, as a small touch, but also complement other chrome pieces. You can makeover your entire vehicle one piece at a time! There are also many different kinds of chrome accessories; it's easy to find a part that's suitable for you. Everyone should love the car they drive, and a chrome upgrade can give you a new found sense of pride for your car or truck by giving it a more upscale appearance.

    If you'd like to start small, with just a touch of chrome, Window Sill Trim is a perfect choice. CCI's window trim is custom fit for specific vehicles, so it will have an exact fit. It is made of durable 304A stainless steel that is polished to a mirror finish. The trim is easy to install using 3M tape with no drilling required.

    If you want to jump right in to the Exterior Chrome world, and want something bigger right away, I would recommend a chrome grill. Precision Grille's EZ Stainless Bar Grille is constructed of 16-gauge 304 stainless steel that is laser cut for perfect fit, sharp straight lines, and no ragged edges. These grilles have a flawless mirror finish that is very easy to maintain: no polishing required! The grilles are also easy to install with very little drilling and cutting required. They can be installed over the existing grille shell for an easy install. You can also remove part of the shell so that none is visible through the grille spaces. These flexible installation option give you complete control over how your vehicle's final look. Hopefully these suggestions will rekindle your love for your vehicle!

    Precision

  • New Coverking Accessories and Bike Covers

    Coverking is a leading manufacturer of car and truck covers. They have expanded their line and now have covers to fit ATVs, motorcycles, and bicycles. Their Bike Covers are made from Silverguard, a 300 Denier polyester fabric that has a reflective and water-resistant coating. This coating helps keep your bicycle protected from sunlight and light to moderate rainfall. These covers fit most standard size bikes and feature durable two way zippers to make securing easier. The motorcycle covers are also made from Silverguard material and feature elastic hems for a tight fit. Each cover is double-stitched for durability and includes grommets for easy securing. Covers are available in five sizes to fit bikes as small as mopeds and as large as full dress cruisers.

    Coverking also has quite a few Car Cover Accessories to use along with your vehicle covers. They have a lock and cable kit that will work with all Coverking car covers and most other brands too. The kit is great for keeping the cover in place and also deters cover theft. The cable slides through the cover's grommets and is secured with a brass lock. Two keys are included with the kit. They also sell a Coverking car duster, which is perfect for dusting off your car prior to using the car cover. The duster's strands are coated in a paraffin wax to attract more dust and make the job easier. A storage bag for the duster is also included.

    Coverking also manufactures handy duffel bags to keep your car cover clean and safe when not in use. The bags can be used with any Coverking car, ATV, bicycle, or motorcycle cover as well as many other brands of car cover. These duffels are available in two materials: Silverguard and Stormproof. Silverguard is the same material used in the bike and motorcycle covers and Stormproof is an advanced microfiber material.

    Coverking

  • Truck Visors are Functional and Stylish

    Truck visors can be an infinitely useful accessory for your truck or SUV because they keep the sun out of your eyes while you drive! Unless you've only ever driven at night, you know how annoying it can be to make a turn and be suddenly blinded by the sun, or to have it shining right in your eyes when you have a lot more miles to go on the same highway. A sun visor can alleviate this annoyance, while adding some style to your ride too.

    Since visors are mounted in a very prominent place on your truck, they will catch a lot of attention. If you want to avoid the "add-on" look and be sure that your new visor blends right in, you should order Painted Truck Visors, which are painted to match the factory color of your vehicle. Some unpainted accessories can complement the look of your vehicle, but a visor is so large that it will look mismatched. You may also be tempted to paint it yourself, but matching the color can take a lot of searching, and even a slight discoloration will clash with the rest of your vehicle.

    STK's ProVisor Truck Sun Visors have the same styling as the original Lund Sunvisor and Sunvisor II and offer a custom fit for each application. Their aerodynamic design is functional without looking clunky, and will keep the sun out of your eyes while maintaining the sleek lines of your vehicle. All necessary mounting hardware and paint-to-match caps are included. Each truck visor can be painted to match the factory color of your vehicle and an LED light kit is also available to enhance your nighttime driving experience.

    Lund's L2R Visor is made from black, UV-resistant ABS and has black accent gridding to give a distinctive look. It has a low profile design to reduce the vibration and whistling noises that can sometimes occur with truck visors. These visors are very easy to install, with minimal drilling required. They make a great addition to any vehicle, and can be used in combination with other Lund L2R accessories for a complete integrated look.

    Lund

  • Classic Chrome Fender Trim

    If you would like to add a classic look to your vehicle, but aren't sure where to start? How about Chrome Fender Trim, a staple of high-end classic cars and premium packages for modern vehicles! Adding some shine to your wheel wells will give your vehicle an instant upgrade, and bring out a sporty edge. It is also a great accessory to begin with if you plan on upgrading other parts to chrome, because the trim is not too subtle, but is also not over-the-top.

    QMI's Stainless Fender Trim adds a classic appearance to your vehicle at an economical cost. The trim is made of highly polished stainless steel and is available in hundreds of custom designs in 1/2, 3/4, and full size styles for specific years, makes, and models of vehicles. Installation is quick and easy and all necessary hardware and instructions are included.

    CCI's Auto and Truck Fender Trim is manufactured from highly polished 304 stainless steel, so it will look shiny and new for years and will not rust. Each part is custom designed for a secure fit for specific vehicles. Trim pieces are sold in four piece sets and all installation hardware is included. Installation is quick and easy with many applications requiring no drilling to install.

    fender trim

    CCI

  • Remarkable Running Boards!

    Why add a Running Board to your truck, SUV, or van? There are plenty of reasons! First of all, they are practical. They give you and your passengers an extra step up into the vehicle. Second, they look good and add an extra touch of style. In some cases they can even complete the look of your vehicle, as off-road or raised trucks can look bare without them. Third, they can differentiate your vehicle and make it stand out. There are so many varieties: paintable ABS, shiny chrome, powdercoated black steel, narrow and sleek, thick and rugged, boards, bars, drop step, full-length, cab-length, etc., that you are sure to find the perfect fit for your vehicle.

    If you're looking for something sleek, that will enhance your truck or SUV without standing out, Painted Running Boards like Owens Side Effects are the right choice for you. They are constructed of impact-resistant ABS plastic with a black matte finish, or, of course, they can be painted to match the factory color of your vehicle. They have full-length steel reinforcements added along the length of each board and a UV protective coating that will keep boards looking new. Boards are available in eight lengths that will fit a variety of trucks, SUVs, and vans. They have custom fit body mount brackets for easy installation and come in pairs: one running board for each side.

    If you would like a running board that stands out, with a little shine and a more rugged look, Delta III Premium Extruded Running Boards are a good choice. They are constructed of heavy-gauge, ribbed aluminum and include large stone guards to prevent damage from road debris. Boards have a durable and corrosion-resistant clear or black anodized finish and have grit tape running along the length of the board for secure footing. These boards are sold in pairs and run from wheel well to wheel well on vans and SUVs and run the length of the cab on pickup trucks, with box boards also available to give a full length look if desired.

    Another way to achieve the rugged look is with nerf bars or Side Bars, like STK's 3-inch Round ProBars. They have a 3-inch diameter and are available with a high-quality mirror polished stainless steel or a 5-stage black powdercoat finish. Each application is custom designed to fit the specific model it is intended for and custom mounting brackets ensure a perfect fit. These STK ProBars have custom polyethylene step pads for maximum slip resistance and an easy, no-drill, bolt-on installation. They are sold in pairs.

    Owens

  • Paintable Hood Products

    The front of your vehicle is often the first part that anyone sees, and thus it sets the tone for the rest of your vehicle. If you would like to spruce up car or truck's front end, there are many available paintable hood products to choose from. Some, like hood scoops, are mainly for decorative purposes, but others, like bug shields, are functional too. If you would like to add some new accessories to the front of your vehicle, but want to maintain its sleek OEM look, you should look for Painted Bug Shields and hood scoops. They can be painted to match the factory color of our vehicle, and thus will blend seamlessly and won't look out of place.

    MVS makes Painted Hood Scoops that are available in single and twin designs. They transform a plain hood into a high performance looking hood with a single accessory at an economical price. These scoops are constructed from high impact ABS plastic to be strong and long-lasting.

    EGR's Superguard is available in smoke or clear finish and can be painted to match the factory color of your car or truck. Each bugshield is computer deigned and custom molded to fit the contours of your vehicle's hood. It offers complete front end and fender protection, keeping the front of the hood splatter free. Each bugshield includes all needed mounting hardware, easy-to-read instructions, and a limited lifetime warranty.

    hood scoop

    MVS

7 Item(s)